High brightness 120LM/W external driver 1x4 / 300x1200mm slim led panel light made in China

Specication Data of 1x4 slim led panel light

1. Colour temperature:2700~7000K

2. Power factor: >0.9 THD:<20%

3. Installation way: Suspending; Surface Mounted; Wall Hang

4. Input Voltage: AC100~277V 277-347V

UL file number:E467461

CSA file number 252050

UL/cUL/DLC/CSA approved.

100~277V AC &277~347V AC are all available.

With 5 years warranty

1. LED panel is a kind of advanced indoor light, which inherits the characteristics of simplicity and classics of Europe style. It is gaining the favor of customers for its super thin profile and clear bright light effect. LED panel creates a strong sense of depth and space when applied in indoor places such as meeting room, VIP reception room, and hotel.

2. LED panel is more energy saving and environment protecting with longer life than traditional light products. Its light is well-proportioned, soft, comfortable and bright.

Specifications of 1x4 slim led panel light

Certificate of 1X4 Slim led panel light

Product images of 1x4 slim led panel light

Features of 1x4 slim led panel light

Super Slim and stylish design

High brightness 2835 LED

High efficiency constant current drive system, with heat protection system

Over 90% light transmission makes the light softly and brightly

Environment friendly, no mercury, no lead, no ultraviolet, no noise and other hazardous substance

Quick start, no flashing, protecting people’s eyes

Dimmer optional

Installation way of 1x4 slim led panel light

Step1: Open the cover of junction box, the two small hold of junction box superpose the two bolt of back board, put the two wires through the bigger hold. Please refer the marked positions.

Step2: Fix screws by screwdriver as picture indicates.

Step3: Connect the DC wire of panel light and power supply, red to red (v+),black to black(v-),by terminal cap, as the picture shows.

Step4: Bend hang buckle by 90°,making it vertical to the rear cover of panel light(Figure4A),Bend hand buckle’s top part by 90°(Figure 4B),Same to all hang buckles.

Step5: Turn off power, and remove the ceiling panel.

Step6: Place the troffer into the T-bar. Ensure the troffer are attached to the ceiling.

Step7: Remove appropriate round knock-out(s) and connect conduit to wiring box with proper connector(s).

Step8: AC inputs connect to neutral in L, the line connect to N, the ground connect to the green wire.

• High brightness led of SMD2835, with efficienct way of drive.
• application of the latest steady flow technology, made the led always work with 30mA. All LED working parameters are consistency.
• Temperature field distribution uniform and no notable hot points.This kind of LED lamp / LED light using the safe working voltage 42V,